Rockford Fosgate P400X4
4 kanálový zesilovač 4x50W rms
Značka: Rockford Fosgate
10 990 Kč
včetně DPH
Kód: p400x4
Datum dodání: Na dotaz
The Punch P400X4 is a 4-channel amplifier producing 100 Watts into all four channels at 2-Ohm. The P400X4 is perfect for a 4-way full-range system or a 3-way system having a front stage with subwoofers on the rear channels.
- High level input capable with Auto Turn-On circuit
- Features C.L.E.A.N. Set-up
- 12dB/octave Butterworth crossover
- On-board Punch EQ with +18dB boost @ 45Hz.
- Muted turn on
- Stealth top mounted control panel
- Cast aluminum heatsink
- Short circuit protection
- Over current protection
CEA-2006 Compliant:
 CEA-2006 Power Rating50W x 4 @ 4Ω ≤1.0% THD+N |
| Number of Channels: | 4 |
| Rated Power (RMS Continuous Power): |
50 Watts x 4 @ 4-Ohm 100 Watts x 4 @ 2-Ohm 200 Watts x 2 @ 4-Ohm Bridged |
| Total Power (Sum of Rated Power): |
400 Watts |
| Dynamic Power (PVC/PowerCube®): |
82 Watts x 4 @ 4-Ohm 137 Watts x 4 @ 2-Ohm 266 Watts x 2 @ 4-Ohm Bridged |
| Bridgeable: | Yes |
| Frequency Response: | 20Hz to 20kHz +/- 1.0dB |
| Efficiency (average): | 67% @ 4-Ohm |
| Total Harmonic Distortion (THD+Noise): | 4-Ohm: <1.0% 2-Ohm: <1.0% |
| Crossover Controls: | Front High-Pass/Low-Pass (HP/LP): 50Hz-250Hz @ 12dB/octave Butterworth Rear High-Pass/Low-Pass (HP/LP): 50Hz-250Hz @ 12dB/octave Butterworth All-Pass: Yes |
| Tone Controls: | Front Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or Front Punch EQ2 Treble: 0dB to +12dB @ 12.5kHz Rear Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or Rear Punch EQ2 Treble: 0dB to +12dB @ 12.5kHz Function depends upon LP/AP/HP switch position |
| Input Sensitivity: | 150 mV - 12 V |
| Signal Input: | Hi/Low level: 2 RCA pair |
| Signal Output: | - |
| Power Input Connector: | Captive C-Clamp |
| Power Wire Gauge: | 8 AWG to 4 AWG |
| Speaker Output Connector: | Captive C-Clamp |
| Speaker Wire Gauge: | 8 AWG to 18 AWG |
| Heat Sink Type: | Cast aluminum |
| Cooling: | Convection |
| Remote Controls: | - |
| Visual Indicators: | Power/Protect/Thermal LED Input Clip LED3 Output Clip LED1,2,3 LED Color Legend: 1BLUE: <0.5% THD 2VIOLET: 1% THD 3RED: 10%+ THD |
| Circuit Topology Class: | Class-A/B |
| Operating Voltage: | 9 - 16 VDC |
| Recommended Fuse (not included): |
60 A |
| Max. Current Draw (13.8V Sinewave): | 60 A |
| Average Current Draw (13.8V Music): | 30 A |
| Suggested Alternator: | 75 A |
| Shipping Weight: | 10.8 Lbs. (4.89 Kg.) |
| Dimensions (H x W x D): | 2.38 x 7.76 x 11.03 (in) 6.05 x 19.71 x 28.02 (cm) |
| Dimensional Diagram: |  |