Úvod / Zesilovače / monobloky / Rockford Fosgate P400X1

Rockford Fosgate P400X1

Rockford Fosgate P400X1

monoblok, 1x250/400W rms

Značka: Rockford Fosgate

Koupit

9 590 Kč
včetně DPH

Kód: p400x1

Datum dodání: Na dotaz

The Punch P400X1 is a mono amplifier capable of producing 400 Watts into a 2-Ohm load and is designed for medium to high-powered subwoofer applications. You can also use the P400X1 for multi-speaker center channel applications.

  • High level input capable with Auto Turn-On circuit
  • RCA pass-thru outputs
  • Features C.L.E.A.N. Set-up
  • Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
  • 12dB/octave Butterworth crossover
  • On-board Punch EQ with +18dB boost @ 45Hz.
  • Muted turn on
  • Stealth top mounted control panel
  • Cast aluminum heatsink
  • Short circuit protection
  • Over current protection

CEA-2006 Compliant:

  CEA-2006 Power Rating
250W x 1 @ 4Ω
≤1.0% THD+N
Number of Channels: 1
Rated Power
(RMS Continuous Power):		 250 Watts x 1 @ 4-Ohm
400 Watts x 1 @ 2-Ohm
Total Power
(Sum of Rated Power):		 400 Watts
Dynamic Power
(PVC/PowerCube®):		 327 Watts x 1 @ 4-Ohms 0° Res
563 Watts x 1 @ 2-Ohms 0° Res
Bridgeable: No
Frequency Response: 20Hz to 20kHz +/- 1.0dB
Efficiency (average): 73% @ 4-Ohm
Total Harmonic Distortion (THD+Noise): 4-Ohm: <1.0%
2-Ohm: <1.0%
Crossover Controls: High-Pass (HP): 50Hz-250Hz @ 12dB/octave Butterworth
Low-Pass (LP): 50-250Hz 12dB/octave Butterworth
All-Pass: Yes
Tone Controls: Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
Punch EQ2 Treble: 0dB to +12dB @ 12.5kHz
Function depends upon LP/AP/HP switch position
Input Sensitivity: 150 mV - 12 V
Signal Input: Hi/Low level: 1 RCA pair
Signal Output: Low Level: 1 RCA Pair
Power Input Connector: Captive C-Clamp
Power Wire Gauge: 8 AWG to 4 AWG
Speaker Output Connector: Captive C-Clamp
Speaker Wire Gauge: 8 AWG to 18 AWG
Heat Sink Type: Cast aluminum
Cooling: Convection
Remote Controls: Optional Punch Level Control (PLC2) Ready
Visual Indicators: Power/Protect/Thermal LED
Input Clip LED3
Output Clip LED1,2,3

LED Color Legend:
1BLUE: <0.5% THD
2VIOLET: 1% THD
3RED: 10%+ THD
Circuit Topology Class: Class-A/B
Operating Voltage: 9 - 16 VDC
Recommended Fuse
(not included):		 60 A
Max. Current Draw (13.8V Sinewave): 60 A
Average Current Draw (13.8V Music): 30 A
Suggested Alternator: 75 A
Shipping Weight: 9.5 Lbs. (4.30 Kg.)
Dimensions (H x W x D): 2.38 x 7.76 x 9.86 (in)
6.05 x 19.71 x 25.04 (cm)
Dimensional Diagram: