| Power Suply |
|
| Voltage | 11 ÷ 15 VDC |
| Idling current | 0.4 A |
| Switched off without DRC | < 2.5 mA |
| Switched off with DRC | < 4.0 mA |
| Remote In voltage | 7 ÷15 VDC (1.3 mA) |
| Remote Out voltage | 12 VDC (130 mA) |
| Distorsion-THD@1 kHz, 1VRMS Output | 0.005 % |
| Bandwidth@ -3dB | 10 ÷ 22 kHz |
| S/N Ratio @ A weighted | 96 dBA |
| Channel Separation (@1 kHz) | 85 dB |
| Input sensitivity (Low Level) | 0.6 ÷ 5 VRMS |
| Input sensitivity (High Level) | 2.0 ÷ 15 VRMS |
| Max Output Levels | 4 VRMS |
| Input impedance (AUX) | 15 kΩ |
| Input impedance (High Level) | 2.2 kΩ |
| Inputs | Low Level (Pre In): AUX L/R High Level (Spk In): FL-FR-RL-RR, Phone In |
| Outputs | Analog Pre Out: Ch1 ÷ Ch5 |
| Crossover | |
| Type | 12/24 dB Linkwitz 6/12/18/24 dB Butterworth |
| Mode | Full/HiPass/LowPass/BandPass (indipendent) |
| Equalizer | |
| Type | 31 Band, ISO 1/3 Oct, 20 Hz ÷ 20 kHz |
| Gain | ± 12 dB |
| Delay | 0 ÷ 22 ms (748 cm) |
| Time Alignment | |
| Distance | 0 ÷ 510 cm |
| Delay | 0 ÷ 15 ms |
| Step | 0.08 ms; 2.8 cm |
| Fine set step | 0.02 ms; 0.7 cm |
| Size | |
| WxHxD | 191x34x131 mm |
| Weight | 0.6 kg |
| Audo DSP and converters |
32 bit Cirrus Logic (Clock speed: 147 MHz) Digital Signal Processing chip and A/D D/A converters working in PCM at 48 kHz with 24 bit resolution. The processor speed allows the user to hear and verify in real time the changes applied during the tuning |
| Audio Inputs | 4 independent high-level channels with automatic summing capability 1 analog low-level stereo auxiliary input 1 high-level momentary audio interrupt input (with priority) on Phone Mute cable (settable through PC) |
| Audio Outputs | 5 independent analog PRE channels featuring adjustable level |
| Control Connections |
1 USB /B (2.0) connector for PC connection 1 AC Link control bus connectors for DRC 1 input for external Mute (settable through PC) |
| Configuration | Guided procedure that, thanks to a wide range of set names, provides the ability to assign each component to the bit Ten connections and automatically coordinate their functioning |
| Turn-on Controls |
ART™, Automatic Remote Turn on/off, selectable from Hi-Level Front L. The ART™ can be enabled through an external switch Through the Remote IN Through the car ignition key with memory function Through the DRC (optional) Automatically through the hands-free phone kit |
| In/Out Volume | Input sensitivity manual adjustable for the Master Hi-Level inputs (with supplied Test CD) Manual input sensitivity adjustment for auxiliary inputs Independent level control for each output channel for system fine tuning (-40 ÷ 0 dB) |
| De-equalization | Automatic de-equalization of signal fed into the high-level inputs (with supplied Test CD) if necessary. It can also be performed without the PC |
| Equalizers | 31-band graphic equalizer (1/3 Oct.; ±12 dB) for each output channels |
| Crossover Filter | Filter typology: selectable; Hi-pass, Lo-pass, Full Range, Band pass with independent selectable cut-off slope Cut-off frequency: 70 steps available from 20 Hz to 20k Hz Cut-off slope: selectable; 6 to 24 dB/Oct. Selectable alignment: Linkwitz or Butterworth Mute: selectable for each output (On/Off) Phase: selectable for each output (0°/180°) |
| Signal channels reconstruction |
It can reconstruct a stereo output signal from a multi-channel input signal. In addition it can reconstruct rear, centre and subwoofer output channels from a stereo input |
| Time Alignment | Guided procedure for the speaker distance data entry with an automated calculation (distance to time) for each channel for accurate delay times. System also provides for manual fine tuning of delay (0.02 ms fine set) |
| DRC (optional) | Master Volume, Subwoofer Volume, Balance and Fader controls, Input selection, Memory selection, Adjustable display brightness |
| Memory | 2 presets separately managed and recalled by the DRC (optional) |
| bit Ten software | Microsoft Windows (XP, 7 and Vista) based software with “Standard” and “Expert” operating modes; screen resolution: 1024x600 px min. |